Tires/Tubes

Dillinger 4 is a fast traction studded fat bike tire. The tightly spaced center tread rolls quickly, while taller, braced side lugs improve cornering in snowy conditions. Carefully positioned studs allow for railing icy, off-camber singletrack with confidence and control. - Braced side lugs for improved cornering - Directional center lugs for rolling speed and braking traction - Replacement studs and stud insertion tool sold separately - Replacement studs and stud insertion tool sold separately

The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability. - Carbide studs grip ice - Braced side lugs improve cornering - Tubeless Ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

- 6061 Aluminum valve and cap - Removable valve core - Comes with round & square rubber bases for different rim types - Spare alloy valve cap with integrated valve core removal tool - Installs securely with a 4mm fitting for a hex wrench on the valve and a 10mm wrench flat on the nut

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

- 3mm thick protective layer - The archetypal high quality touring tire - E-Bike Ready. You can choose every Marathon for your E-Bike (E-25). The main sizes are approved and tested for E-bikes up to 50 km/h (E-50).

- A legendary Cross Country tread offering excellent traction and cornering - Torch Tread multi-height high-density rubber knobs - Burning Edge silica-reinforced cornering knobs - ASB anti-pinch sidewalls

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface. - Deep, aggressive lugs dig into snow - Tall side lugs provide cornering confidence - 252 concave studs tear into slick surfaces - Tubeless ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss

The Grand Prix 5000 is the best all-rounder in the field, brought to a whole new performance level. Ride faster, more comfortably, and with increased puncture protection. Its Active Comfort Technology absorbs vibrations and smooths your ride. Lazer Grip technology, designed to make you one with the road, features a lasered micro profile structure that expands over the tire’s shoulder and provides outstanding cornering. The Vectran Breaker is lighter, more flexible and protects more effectively against cuts than comparable nylon. With incredible tear resistance at a very low weight, it possesses exactly the right properties to be a premium puncture protection insert, while not adversely affecting rolling resistance. The Grand Prix 5000—made to make you better. With Continental's unique and legendary BlackChili tread compound, produced only in Germany, they have revolutionized the sport of cycling. This compound answers the eternal question of the best balance of grip and rolling resistance for cycling. Regular test wins confirm the measurable and noticeable advantages for cyclists, established in both the lab and on the road. The latest polymers, as well as specially developed carbon black particles and filler materials, guarantee ultimate performance.

Versatile and confidence inspiring, the Gravdal securely navigates through harsh winter conditions with concave carbide studs for added traction in icy conditions. - Siping creates a more conforming lug for added traction - Concave carbide studs provide traction in the iciest conditions - Reflective strip on sidewall makes you more visible when riding in low-light conditions - Fits most bikes with cantilever or disc brakes

Designed with the unknown in mind, the Rutland takes the guess work out of selecting the right tire for the ride. Ramped, tightly spaced center lugs reduce rolling resistance while larger, more spaced-out shoulder and transition lugs provide grip in loose conditions. - Designed and inspired by experiences riding and racing rolling coarse-gravel routes - Tubeless ready for flat prevention, lower-pressure traction and comfort - Ideal internal rim width is 23mm HOW IT WORKS - Center lugs are large and widely spaced for braking and acceleration grip, and ramped to lower rolling resistance. - Transition lugs are spaced out to shed mud; siping conforms to the road surface for increased traction in corners. - Side lugs are staggered to provide traction in more aggressive turns and on loose surfaces.

GRAVEL Whether your route covers rough roads or fast gravel, or even both in the same day, Washburn is built for the job. Its center slick provides awesome rolling efficiency on pavement and packed dirt, while the shoulder lugs take over in the turns, digging in for confidence in loose corners. HOW IT WORKS - Center tread is smooth to minimize rolling resistance and maximize speed. - Transition lugs are tightly spaced to provide progressive initial cornering traction. - Side lugs are spaced out to dig in while cornering and when riding over loose surfaces.

Low rolling resistance, a supple feel, and traction to tackle any road you desire. The tubeless ready Crosscut Gravel reduces your risk of punctures and the aggressive, fast-rolling tread loves to tackle all your adventures—on or off the beaten path. - Gravel tread design with enhanced traction on loose surfaces - Tubeless Ready design allows for reduced air pressure to enhance comfort and reduced risk of punctures - Tread compound optimized for 30% pavement, 70% gravel or dirt road riding - X-Shield Puncture Protection features exceptionally cut-resistant and abrasion-resistant material added to the sidewalls for better puncture resistance and durability in harshest conditions - Weight: 705g (700c x 45) - 60 TPI - Wire bead

The XCO European Champion tire The Mezcal is the versatile all-rounder that gets you to the podium, time after time. Ride a combination of terrain? This is the choice of the pros. The Mezcal features a unique, low-profile tread that is tightly spaced in the center for low rolling resistance and durability. Countless effective edges work together to grip a variety of terrain, while directional siping on each knob find traction in the roots and rocks. The best tires are built with the best casing and compound, and the Mezcal TNT is no exception. Using the proprietary Graphene enhanced 4C compound, the Mezcal attains the holy grail of XC tires; grip, durability, and low weight. - Defined center-ridge tread for low rolling resistance

Martello hammers home the performance you expect on the most demanding Enduro and DH courses. Looking for the one tire to tackle a wide range of courses? This is the ticket. How does the Martello deliver this level of performance? Start with a World Championship proven TNT bead, add the proprietary 4C Graphene compound, and top it off with a moto-inspired tread design with progressive-width siping. This last part is key and provides for a progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect. Whether shredding rocks, roots, or mixed terrain, Martello delivers! - Moto-block square knobs offer stability and durability - Progressive sipe-width pattern provides tactile grip at the knob surface without sacrificing speed or grip

Aim higher: at 54% lighter, 2x more puncture-resistant, and 50% smaller packed size compared to standard rubber tubes, Tubo-BMX tubes jump to new heights. - 42mm valve length

- The SS and SS+ feature an all-new tread pattern consisting of a smoother, diamond pattern center with more aggressive side lugs. - This tread pattern allows the rider to keep speed going into corners and maintain control throughout any transition a gravel ride could present. - The GravelKing SS incorporates a supple 126 TPI casing with a nylon puncture resistant belt and Panaracer's proprietary ZSG (Zero Slip Grip) compound. - The SS+ uses the same build as the SS but adds a bead-to-bead layer of Panaracer's ProTite puncture material for even more protection against tread and sidewall cuts for those extra demanding courses or rides with sharp flint rock.

The new version of the Maxxis Forekaster is aimed squarely at modern short travel (100mm-130mm) trail bikes – aka the “downcountry” segment. Intended to be a “Goldilocks” tire, the new Forekaster (released July 2022) rolls faster than a Minion or even the Dissector but provides more predictable cornering, climbing, and braking traction than the Aspen or Rekon.

- The Ikon is for true racers looking for a true lightweight race tire. - With 3C Triple Compound Technology, high-volume casing and a fast rolling tread design, the Ikon provides exemplary performance in all riding conditions. - As its name suggests, the Ikon represents all that is true in racing.

- Micro knurled surface for maximum grip - Fast rolling shallow groove tread pattern - Roll over tread surface for confident cornering

- Gravel bike tire for aggressive terrain

OFF-ROAD The Kessel is our aggressive trail, all-mountain, and enduro tire. Tall, angular lugs, an open tread pattern, and dual-compound rubber work together for exceptional grip on loose, technical terrain. Ramped center lugs keeps rolling resistance low, while our Durable and Ultra-Durable casings with sidewall and puncture protection keep you rolling. Kessel delivers predictable performance as you push your limits. HOW IT WORKS - Center lugs are tall, angular, and ramped in the front to keep rolling resistance low; a flat side on the back boosts braking traction. Siping conforms to the terrain for maximum traction, and wide spacing improves grip while shedding mud and debris. - Alternating side lugs are angled to add traction in every direction; wide, parallel siping digs into loose trail surfaces while cornering.

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

- Specifically developed for the front wheel - Extra-aggressive XC tread - Precise steering behavior - Reliable cornering when riding at the limit - Sporty handling and direct feedback - High braking performance in all conditions - Addix Speedgrip compound: Speed, grip, and durability

The SS was the pioneering choice and remains the optimal selection for a smooth center tread gravel tire, delivering exceptional cornering grip. Tubeless Ready up to 60 PSI on most models* Product Specifications: - Ideal for gravel, dirt, and rough pavement - Available in Black Tread and Black or Brown Wall Colors - Folding (Aramid) Bead? Available in 700C and 650B/27.5" and a variety of widths - TLR and Hookless Compatible in widths 700 x 30C and wider and all 650B/27.5" versions. TuffTex Boasting a supple, high thread count casing and fortified with Panaracer's own precisely engineered bead-to-bead puncture protection. Beadlock Our meticulously redesigned bead has been engineered to accommodate an extensive array of rim types and encompassing both hookless and clincher varieties. ZSG Gravel Crafted specifically for gravel terrain and guaranteeing exceptional resilience against temperature variations, delivering consistent rubber performance from cold to hot.

Speed and reliability for riders pursuing a new performance level Corsa N.EXT is the exciting new addition to the Corsa family. Designed to satisfy the requirements of enthusiast cyclists who clock up the miles on long and demanding weekly rides, Corsa N.EXT combines Vittoria's peerless knowledge of racing performance with the durability of a long-lasting nylon casing that uses a unique Silica and Graphene compound for improved rolling efficiency, grip and longer wear-life. To increase puncture protection, the central section of the casing features 3 layers of nylon as well as an additional puncture protection belt. Corsa N.EXT is the first road racing tire to feature a QR Code—printed on the tire hot patch—for easy access to useful technical information about the tire. Racing inspired speed and feel, with the everyday durability of nylon construction - New combination of Silica and Graphene compound for improved rolling efficiency, grip and longer wear-life - Nylon casing provides durability, for daily racers who want to raise the bar of their performance relying on a long-lasting tyre - Proven tread design used by Vittoria teams in the World Tour

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike. Instructions (1) Remove valve cap, o-ring and lock nut (2) Insert valve through valve hole in rim (3) Push the o-ring onto valve stem (4) Thread the lock nut onto valve stem (5) hand tighten lock nut until firm (6) Screw on valve cap

Riding technical XC? The Barzo is the choice of World Champions. How can such an aggressive XC tire roll so fast? The magic starts in the center tread, where we place an alternating ridge design and progressive sipe angles. Cornering duties are handled by the moto-style block knobs, laid out in a proven V-formation. The result is a tire that corners as fast as it rolls, while still offering the protection of a full-depth tread. Rocks and roots? Check. World Championship? Check. - Aggressive XC tread for the most technical terrain - Center tread consists of an alternating ridge pattern with progressive sipe angles - Shoulder tread utilizes a moto-style block knob in a V-formation - Designed for performance in rough and smooth hardpack

Virtually Eliminates Flats Tannus Armour wraps around your tube. With up to 15mm of protection, sharp objects can't penetrate your inner tube. Never Stop Riding In the unlikely event you do get a flat tire, you can still ride for a limited period of time. More Than Flat Protection Tannus Armour's design also helps protect your rim on those big drops and hard hits. Better Handling Ride The Tannus Armour sidewalls help stabilize your tires on corners and cushion the ride for more comfort. - Easy installation - Reduce punctures risk - Protects your rims from impact and sharp object penetration - Sidewall protection - Ideal For E-bike and MTB

The Terreno Zero features a smooth center that rolls fast, while the side tread "scales" provide durable bite when cornering and braking. - Designed for paved surfaces and hard-packed gravel - Graphene compound

Continental’s Mountain King CX reigns over muddy cyclocross courses thanks to its deep profile and open spacing between center and side knobs. This, combined with its Black Chili compound, large volume, and aggressive side lugs, ensures great cornering grip and excellent rolling efficiency.